Here is a great video explaining about CE marking of fabricated structural steelwork under the Construction Products Regulation (305/2011). The video is also supported by a information rich “encyclopedia”: https://www.steelconstruction.info/CE_marking. Although the information aims at the UK industry, most of it applies to any company that intends to make available fabricated structural steelwork in the European Union.
CE Standards
European Commission Updates the List of Harmonized Standards for the EMC Directive 2004/108/EC
The European Commission has published the list of titles and
Update to List of European Harmonized Standards for the Construction Products Directive (89/106/EEC)
This morning, the European Commission published an updated list of
New List of European Harmonized Standards for the Low Voltage Directive (2006/95/EC)
On May 28 2013, the European Commission published an updated list of the European harmonized standards that pertain to the Low Voltage Directive (2006/95/EC). The standards on this list may be used by electrical equipment manufacturers to prove that their equipment complies with the essential requirements of this directive.
This updated list is important to all manufacturers of CE marked electrical equipment that have used European harmonized standards to prove CE compliance. If you have applied standards to prove compliance with the aforementioned directive, we recommend you to check the new list of standards to see if any of the standard you applied have been updated, or whether there are new standards available for your products. When standards have been updated by this list, you need to re-evaluate your products against the updated standard and update your Declaration of Conformity.
The new standards on the list are:
- EN 50117-2-5:2004/AC:2012
Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MHz – 3 000 MHz - EN 50288-9-1:2012 (new)
Multi-element metallic cables used in analogue and digital communication and control — Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz – Horizontal and building backbone cables - EN 50288-10-1:2012 (new)
Multi-element metallic cables used in analogue and digital communication and control — Part 10-1: Sectional specification for screened cables characterized up to 500 MHz – Horizontal floor and building backbone cables - EN 50288-11-1:2012 (new)
Multi-element metallic cables used in analogue and digital communication and control — Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz – Horizontal and building backbone cables - EN 60061-1:1993/A48:2012
IEC 60061-1:1969/A48:2012 - EN 60061-2:1993/A45:2012
IEC 60061-2:1969/A45:2012 - EN 60061-3:1993/A46:2012
IEC 60061-3:1969/A46:2012 - EN 60204-32:2008
Safety of machinery – Electrical equipment of machines — Part 32: Requirements for hoisting machines
IEC 60204-32:2008 - EN 60269-4:2009/A1:2012
Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
IEC 60269-4:2009/A1:2012 - EN 60309-1:1999/A2:2012
Plugs, socket-outlets and couplers for industrial purposes — Part 1: General requirements
IEC 60309-1:1999/A2:2012 - EN 60335-2-2:2010/A11:2012
Household and similar electrical appliances – Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2:2009 - EN 60335-2-5:2003/A12:2012
Household and similar electrical appliances – Safety — Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2002 (Modified) - EN 60335-2-6:2003/A12:2012 and A13:2013
Household and similar electrical appliances – Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6:2002 (Modified) - EN 60335-2-7:2010/A1:2013
Household and similar electrical appliances – Safety — Part 2-7: Particular requirements for washing machines
IEC 60335-2-7:2008 (Modified) - EN 60335-2-11:2010/A11:2012
Household and similar electrical appliances – Safety — Part 2-11: Particular requirements for tumble dryers
IEC 60335-2-11:2008 (Modified) - EN 60335-2-13:2010/A11:2012
Household and similar electrical appliances – Safety — Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
IEC 60335-2-13:2009 - EN 60335-2-17:2013
Household and similar electrical appliances – Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012 - EN 60335-2-36:2002/A11:2012
Household and similar electrical appliances – Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
IEC 60335-2-36:2002 - EN 60335-2-37:2002/A11:2012
Household and similar electrical appliances – Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers
IEC 60335-2-37:2002 - EN 60335-2-42:2003/A11:2012
Household and similar electrical appliances – Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60335-2-42:2002 - EN 60335-2-47:2003/A11:2012
Household and similar electrical appliances – Safety — Part 2-47: Particular requirements for commercial electric boiling pans
IEC 60335-2-47:2002 - EN 60335-2-48:2003/A11:2012
Household and similar electrical appliances – Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters
IEC 60335-2-48:2002 - EN 60335-2-54:2008/A11:2012
Household and similar electrical appliances – Safety — Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
IEC 60335-2-54:2008 - EN 60335-2-65:2003/A11:2012
Household and similar electrical appliances – Safety — Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002 - EN 60358-1:2012
Coupling capacitors and capacitor dividers — Part 1: General rules
IEC 60358-1:2012 - EN 60432-2:2000/A2:2012
Incandescent lamps – Safety specifications — Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999 (Modified)/A2:2012 - EN 60432-3:2013
Incandescent lamps – Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle)
IEC 60432-3:2012 - EN 60688:2013
Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
IEC 60688:2012 - EN 60695-11-3:2012
Fire hazard testing — Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test methods
IEC 60695-11-3:2012 - EN 60811-100:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 100: General
IEC 60811-100:2012 - EN 60811-201:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 201: General tests – Measurement of insulation thickness
IEC 60811-201:2012 - EN 60811-202:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 202: General tests – Measurement of thickness of non-metallic sheath
IEC 60811-202:2012 - EN 60811-203:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 203: General tests – Measurement of overall dimensions
IEC 60811-203:2012 - EN 60811-301:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 301: Electrical tests – Measurement of the permittivity at 23 °C of filling compounds
IEC 60811-301:2012 - EN 60811-302:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 302: Electrical tests – Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
IEC 60811-302:2012 - EN 60811-401:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 401: Miscellaneous tests – Thermal ageing methods – Ageing in an air oven
IEC 60811-401:2012 - EN 60811-402:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 402: Miscellaneous tests – Water absorption tests
IEC 60811-402:2012 - EN 60811-403:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 403: Miscellaneous tests – Ozone resistance test on cross-linked compounds
IEC 60811-403:2012 - EN 60811-404:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 404: Miscellaneous tests – Mineral oil immersion tests for sheaths
IEC 60811-404:2012 - EN 60811-405:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 405: Miscellaneous tests – Thermal stability test for PVC insulations and PVC sheaths
IEC 60811-405:2012 - EN 60811-406:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 406: Miscellaneous tests – Resistance to stress cracking of polyethylene and polypropylene compounds
IEC 60811-406:2012 - EN 60811-407:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 407: Miscellaneous tests – Measurement of mass increase of polyethylene and polypropylene compounds
IEC 60811-407:2012 - EN 60811-408:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 408: Miscellaneous tests – Long-term stability test of polyethylene and polypropylene compounds
IEC 60811-408:2012 - EN 60811-409:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 409: Miscellaneous tests – Loss of mass test for thermoplastic insulations and sheaths
IEC 60811-409:2012 - EN 60811-410:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 410: Miscellaneous tests – Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
IEC 60811-410:2012 - EN 60811-411:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 411: Miscellaneous tests – Low-temperature brittleness of filling compounds
IEC 60811-411:2012 - EN 60811-412:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 412: Miscellaneous tests – Thermal ageing methods – Ageing in an air bomb
IEC 60811-412:2012 - EN 60811-501:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 501: Mechanical tests – Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-501:2012 - EN 60811-502:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 502: Mechanical tests – Shrinkage test for insulations
IEC 60811-502:2012 - EN 60811-503:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 503: Mechanical tests – Shrinkage test for sheaths
IEC 60811-503:2012 - EN 60811-504:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 504: Mechanical tests – Bending tests at low temperature for insulation and sheaths
IEC 60811-504:2012 - EN 60811-505:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 505: Mechanical tests – Elongation at low temperature for insulations and sheaths
IEC 60811-505:2012 - EN 60811-506:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 506: Mechanical tests – Impact test at low temperature for insulations and sheaths
IEC 60811-506:2012 - EN 60811-507:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 507: Mechanical tests – Hot set test for cross-linked materials
IEC 60811-507:2012 - EN 60811-508:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 508: Mechanical tests – Pressure test at high temperature for insulation and sheaths
IEC 60811-508:2012 - EN 60811-509:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 509: Mechanical tests – Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC 60811-509:2012 - EN 60811-510:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 510: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Wrapping test after thermal ageing in air
IEC 60811-510:2012 - EN 60811-511:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 511: Mechanical tests – Measurement of the melt flow index of polyethylene compounds
IEC 60811-511:2012 - EN 60811-512:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 512: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Tensile strength and elongation at break after conditioning at elevated temperature
IEC 60811-512:2012 - EN 60811-513:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 513: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Wrapping test after conditioning
IEC 60811-513:2012 - EN 60811-601:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 601: Physical tests – Measurement of the drop point of filling compounds
IEC 60811-601:2012 - EN 60811-602:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 602: Physical tests – Separation of oil in filling compounds
IEC 60811-602:2012 - EN 60811-603:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 603: Physical tests – Measurement of total acid number of filling compounds
IEC 60811-603:2012 - EN 60811-604:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 604: Physical tests – Measurement of absence of corrosive components in filling compounds
IEC 60811-604:2012 - EN 60811-605:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 605: Physical tests – Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 60811-605:2012 - EN 60811-606:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 606: Physical tests – Methods for determining the density
IEC 60811-606:2012 - EN 60811-607:2012
Electric and optical fibre cables – Test methods for non-metallic materials — Part 607: Physical tests – Test for the assessment of carbon black dispersion in polyethylene and polypropylene
IEC 60811-607:2012 - EN 60838-2-2:2006/A1:2012
Miscellaneous lampholders — Part 2-2: Particular requirements – Connectors for LED-modules
IEC 60838-2-2:2006
The updated list of standards can be found in our Library shortly.
New List of European Harmonized Standards Under the Toys Directive (2009/48/EC)
Last Saturday, the European Commission published an updated list of
Construction Products Directive (89/106/EEC): Update to list of European harmonized standards
This morning, the European Commission published an updated list of the European harmonized standards that pertain to the Construction Products Directive (89/106/EEC). The standards on this list may be used by construction products manufacturers to prove that their construction products complies with the essential requirements of this directive.
This updated list is important to all manufacturers of CE marked construction products that have used European harmonized standards to prove CE compliance. If you have applied standards to prove compliance with the aforementioned directive, we recommend you to check the new list of standards to see if any of the standard you applied have been updated, or whether there are new standards available for your products. When standards have been updated by this list, you need to re-evaluate your products against the updated standard and update your Declaration of Conformity.
On the list for the Construction Products Directive (89/106/EEC), the following standards are added or amended:
EN 54-25:2008/AC:2012 Fire detection and fire alarm systems – Part 25: Components using radio links
EN 197-1:2011 Cement – Part 1: Composition, specifications and conformity criteria for common cements
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding – Product specifications
EN 681-3:2000/A2:2005 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
EN 681-4:2000/A2:2005 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 4: Cast poly urethane sealing elements
EN 682:2002/A1:2005 Elastomeric Seals – Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 997:2012 WC pans and WC suites with integral trap (replaces EN 997:2003)
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
EN 1168:2005+A3:2011 Precast concrete products – Hollow core slabs
EN 1317-5:2007+A2:2012 Road restraint systems – Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1423:2012 Road marking materials – Drop on materials – Glass beads, antiskid aggregates and mixtures of the two
EN 1457-1:2012 Chimneys – Clay/ceramic flue liners – Part 1: Flue liners operating under dry conditions – Requirements and test methods
EN 1457-2:2012 Chimneys – Clay/ceramic flue liners – Part 2: Flue liners operating under wet conditions – Requirements and test methods
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 12839:2012 Precast concrete products – Elements for fences
EN 13224:2011 Precast concrete products – Ribbed floor elements
EN 14844:2006+A2:2011 Precast concrete products – Box culverts
EN 15102:2007+A1:2011 Decorative wall coverings – Roll and panel form
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs – Requirements and test methods
The list of European harmonized standards (“2012 C176/01“) has been added to our CE Marking Library.
EN ISO 12100-1:2003 +A1:2009
Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology, methodology
This European Standard defines basic terminology and methodology used in achieving safety of machinery. The provisions stated in this standard are intended for the designer.
Pages: 33
EN ISO 12100-2:2003 +A1:2009
Safety of machinery – Basic concepts, general principles for design – Part 2: Technical principles
This European Standard defines technical principles to help designers in achieving safety in the design of machinery. This European Standard is intended to be used together with EN ISO 12100-1 when considering the solution to a specific problem. The two parts of EN ISO 12100 can be used independently of other documents or as a basis for the preparation of other type-A standards or type-B or -C standards. The provisions stated in this standard are intended for the designer.
Pages: 32