[custom_headline type=”left” level=”h2″ looks_like=”h3″ accent=”false”]Gas Appliances Directive 2009/142/EEC[/custom_headline]
Directive 2009/142/EC of the European Parliament and of the Council of 30 November 2009 relating to appliances burning gaseous fuels
The Gas Appliances Directive (with the official reference number 2009/142/EC) applies to appliances and fittings. The appliances it covers are those ‘burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting or washing’. Also referred to as GAD, this directive covers mainly consumer and commercial products. Other devices intended to be incorporated in the appliances that have a regulating, controlling or safety feature, are covered by the GAD as well.
Please note that the Directive on Appliances Burning Gaseous Fuels has not harmonised the gas types and supply pressures in EU Member States (or other installation aspects). Member States are therefore allowed to determine their gas types and supply pressures. For the correct and safe use of gas appliances, it is very important to know the type of gas used and the supply pressure.
The Gas Appliances Directive (2009/142/EC) covers appliances and fittings that match the definition provided in the directive:
[icon_list] [icon_list_item type=”check”] ‘appliances’ means appliances burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting or washing and having, where applicable, a normal water temperature not exceeding 105 °C. Forced draught burners and heating bodies to be equipped with such burners shall also be considered as appliances. [/icon_list_item] [icon_list_item type=”check”] ‘fittings’ means safety devices, controlling devices or regulating devices and sub-assemblies, other than forced draught burners and heating bodies to be equipped with such burners, separately marketed for trade use and designed to be incorporated into an appliance burning gaseous fuel or assembled to constitute such an appliance; [/icon_list_item] [/icon_list]
Appliances specifically designed for use in industrial processes carried out on industrial premises are excluded from the scope of the Gas Appliances Directive.
This Directive sets out the process of certifying whether an appliance conforms with the requirements for it to be placed on the market. For series-manufactured appliances, the process has two phases: First, the EC type-examination by a Notified Body. Secondly, the manufacturer must either complete one of three EC declaration of conformity to type procedures, or opt for the EC verification procedure.
In cases where the appliance is produced as a single unit or in small quantities, the manufacturer can opt for EC verification by single unit.
[custom_headline style=”margin: 0;” type=”left” level=”h3″ looks_like=”h5″ accent=”false”]Downloads[/custom_headline]
[custom_headline type=”left” level=”h3″ looks_like=”h5″ accent=”false”]European Harmonised Standards Related to Gas Appliances Directive 2009/142/EEC:[/custom_headline]
[recent_posts count=”2″ orientation=”horizontal” category=”gas-appliances-directive”] [recent_posts count=”2″ orientation=”horizontal” category=”gas-appliances-directive” offset=”2″]
- Machinery Directive – 2006/42/EC
- Low Voltage Directive – 2014/35/EU
- EMC Directive – 2014/30/EU
- Medical Devices Directive – 93/42/EEC
- Personal Protective Equipment Directive – 89/686/EEC
- Construction Products Regulation – Regulation (EU) No 305/2011
- Pressure Equipment Directive – 97/23/EC
- REACH – Regulation (EC) No 1907/2006
- Waste Electrical and Electronic Equipment Directive – 2012/19/EU
- ATEX Directive – 2014/34/EU
- Toy Directive – 2009/48/EC
- R&TTE Directive – 1999/5/EC
- Recreational Craft Directive – 94/25/EC
- Active Implantable Medical Devices Directive – 90/385/EEC
- Explosive for Civil Use Directive – 93/15/EEC
- Noise Emission in the Environment Directive – 2000/14/EC
- Lifts Directive – 1995/16/EC
- Pyrotechnic Directive – 2007/23/EC
- Measuring Instruments Directive – 2004/22/EC
- What is CE marking?
- What does the CE mark mean? What do the initials CE stand for?
- Do your products need CE marking?
- How do you benefit from CE marking??
- In which countries is the CE marking required?
- What does CE certification cost?
- Do our products automatically qualify for the CE mark when they are UL/CSA approved?
- Who should undertake CE marking?
- Notified Bodies: What Are They? What Is Their Role
- What is the CE marking process?
- What files / documentation must I keep?
- How and where must the CE mark appear?
- Other Posts About CE Marking
[x_share title=”Share this Post” facebook=”true” twitter=”true” google_plus=”true” linkedin=”true” email=”true”]